Specifications
Carton tape sealer machine can accomplish the forming, folding and sealing process simultaneously.
Carton tape sealer machine can accomplish the forming, folding, and sealing process simultaneously.
1. It can accomplish the forming, folding and sealing process simultaneously.
2. Storage system is equipped with alarm system.
3. Hot Melt Glue System is optional
Carton tape sealer machine
|
Models
|
KL-12, KL-18, KW-25, KW-40
|
|
Power Supply
|
220V/380V 50HZ /60HZ 300W
|
|
Applicable Case Size
|
L:200-450; W:150-400; H100-350(MM)
|
|
Packing Speed
|
8-12cartons/min;
15-18cartons/min;
25cartons/min;
40cartons/min.
( according to carton size)
|
|
Tape Width
|
48/60/72MM
|
|
Air Source
|
0.6-0.7Mpa
|
|
Machine Dimension
|
L2000*W1900*H1450MM
|
High Quality Carton tape sealer machine Specifications
Carton tape sealer machine is for open the cardboard to form carton with bottom sealing,
can connect with other machine.
Carton tape sealer machine Introduction:
Carton tape sealer machine (auto carton forming machine,auto case erector) can finish the work of carton opening, shaping, folding and sticking adhesive tapes. It does not only saves time and force but also can correct the carton to the right-angle automatically.
It is adjusted with the size of the carton easily, and was widely used in the packaging field. It also can be operated easily as well as reduce the cost.
The case blanks stand vertically in the quick load magazine which has space for more than
100 blanks (may be different according to the thickness of the carton).
The blank is picked up from the magazine by a device with suction cups and erected
To the carton holder. The erected carton is fed by a mobile mechanical movement,
The tape glue is applied on the long flap during feeding.
Safety controls:
-When blanks are not fed in properly
-When drive motors are overload
-When safety guards are opened
-When air pressure in undersized
All parts coming in contact with the packs are made of stainless or rust protected material.
The machine is controlled by a micro computer( also called PLC).
Auto Carton Erector Specifications:
1) Table height: 750 ±50mm
2) Air source: 5 - 6kg/cm³
3) Tape: 48/60/72mm
