1 It adopts current advanced RO system, the output water no particle, tasteless.
Requirements and system design basis
V Water source: TDS< 3000PPM
V Raw water quality: Tap water
V Output water quality: Purified water standard
V Production capacity: 10000L/H
V Recovery rate: >75%
2 System specific
V System operation: 24 hour
V Water supply: Continuous water supply
V Operation: This system adopts the interlocking control part of the automatic operation
Scope of design: From the raw water to pure water equipment outlet device
System configuration
U Water quality of pretreatment system: Consists of quartz sand filter, activated carbon filter, the pp security filter;
U Fine filtration system: Consists of HYDE reverse osmosis device
U Counter-part systems: Electric control system composition.
U Water treatment system for peripheral basic setup requirements
U Power supply: 220V 50HZ 1 phase or according to client requirements do it.
3 Technological process
Source water pump Quartz Sand Filter Active carbon filter pp security filter 10000L/H RO membrane system USE Water point
4 RO device:
Reverse osmosis membrane is the heart of the system, design reasonable or not directly depends on not only mature RO system
can meet the design requirements, and related to the service life of reverse osmosis membrane, water, treated by reverse osmosis
unit can remove bacteria and organic matter, microorganism. RO device without phase transition in the process of water separation,
recovery rate is high, the device is small in size, automatic operation, applicability, wide scope of application, no environmental pollution,
etc, this system adopts the reverse osmosis membrane system, can purify the water particles, organic matter, etc, to the water quality
pure water standard.
5 Control introduce
This system for automatic operation, in the condition of automatic interlock control system. Automatic control, according to the situation
of this system, the pretreatment of source water pump and RO system appropriate USES centralized control, the controller mainly done
all kinds of monitoring, parameter setting, etc. Each unit equipment are equipped with the corresponding artifacts instrumentation and monitoring
instrument, has self diagnosis ability. Devices using interlocking protection, the safe running of the equipment.
